Skip to main content

常见问题

如何获取tesla api token(特斯拉访问令牌)​

以下几个开源应用程序可用于获取您特斯拉帐号的访问令牌，你可以用电脑或手机浏览这个网页，安装App,然后登录获取令牌

注意事项​

  • 需要注意的是,Refresh Token对应的中文是刷新令牌，ios版的顺序和网页是相反的。注意别输入错误
  • 输入错误后，有可能卡住导致之后一直提示无效令牌，这时需要重启下服务或重启服务器.

下载地址​

Why are no consumption values displayed in Grafana?​

Unfortunately the Tesla API does not return consumption values for a trip. In order to still be able to display values TeslaMate estimates the consumption on the basis of the recorded (charging) data. It takes at least two charging sessions before the first estimate can be displayed. Charging sessions have to be longer than 10 minutes and less than 95% state-of-charge (SoC). Each future charging session will slightly improve the accuracy of the estimate, which is applied retroactively to all data.

What is the geo-fence feature for?​

At the moment geo-fences are a way to create custom locations like 🏡 Home or 🛠️ Work That may be particularly useful if the addresses (which are provided by OpenStreetMap) in your region are inaccurate or if you street-park at locations where the exact address may vary.

Help, my car does not fall asleep​

Cars with Media Control Unit version 1 (MCU1) require certain settings to be able to fall asleep. Model S and Model X cars built before 3/2018 have the MCU1 unit, this can also be checked from the Software -> Additional vehicle information. If the 'Infotainment processor' is 'NVIDIA Tegra', the car is equipped with MCU1.

The settings needed to enable the sleep mode with MCU1 are:

  • 'Display' -> 'Energy saving' -> ON
  • 'Display' -> 'Always connected' -> unchecked
  • 'Safety & security' -> 'Cabin overheat protection' -> OFF

With these settings the MCU1 cars should fall asleep within some 15 minutes of inactivity. This is what you should see in the log when streaming mode is enabled in TeslaMate

  • [info] Suspending logging after 3 minutes of inactivity (doors locked)
  • [info] Fetching vehicle state ... about 21 minutes later. The car should have fallen asleep during this period

In this example the driver's door was opened and closed:

teslamate_1     | 2021-03-16 11:41:19.336 car_id=1 [info] Start / :online
teslamate_1     | 2021-03-16 11:41:19.603 car_id=1 [info] Connecting ...
teslamate_1     | 2021-03-16 11:44:41.380 car_id=1 [info] Suspending logging
teslamate_1     | 2021-03-16 12:03:27.356 car_id=1 [info] Fetching vehicle state ...
teslamate_1     | 2021-03-16 12:03:28.123 car_id=1 [info] Start / :asleep
teslamate_1     | 2021-03-16 12:03:28.139 car_id=1 [info] Disconnecting ...

image

Note! If you are using some other data logger like TeslaFi at the same time, the sleep attempts probably fail as the other data logger is keeping the car awake. Especially calling the Vehicle Data API will reset the car's inactivity timer.

Why am I missing data when not using the Streaming API?​

The problem with the polling mode is that the car does not fall asleep before it have been inactive for some 15 minutes. TeslaMate will suspend all polling after the car has been idle for 3 minutes (the 'Idle Time Before Trying to Sleep' setting), and will resume polling 15 minutes later (the 'Time to Try Sleeping' setting). Any activity during this 15 minutes can't be detected, as calling the Vehicle Data API would reset the car's inactivity timer, preventing the car from falling asleep.

Calling the Vehicle API does not reset the inactivity timer, but it only tells if the car is either online (driving, charging, idle, about to fall asleep) or asleep. It can't tell if an idle car started driving during the 'Time to Try Sleeping' period.

Why are my Docker timestamp logs different than my machine?​

Docker container timezones default to UTC. To set the timezone for your container, use the TZ Environment Variable in your YML file. More information found at Environment Variables